By Your home can be threatened not only by dust and dirt but also by molds growing on it. They can also shake the cleanliness and protection that your home holds for your family’s health. Only with an effective and safe home mold removal can it be regained after the molds had it infested.
High indoor humidity level, leaks and poor cleaning practices can cause mold growth. Along with it are various negative effects on health and on the structure itself. If the mold cleaning is implemented later than it should have been, expect to treat an infestation worse than you had first seen. Molds grow fast and so a mold removal process executed as soon as you can is needed to save what molds had damaged.
However, immediate implementation does not mean to abandon standard procedures. If you will not follow an ordered steps, your process will be messy and undirected. This can bring unsatisfying results which can possibly leave the molds in your home to continuously produce negative results.
Once you have detected a mold infestation and if it is still in a state that you can have it removed by yourself, execute a mold removal with an organized steps or consult a service for finding out the mold cleaning cost. If you are going to do it yourself, ensure that you’ve got yourself protected with mask, goggle, gloves and coverall. Here is a brief guide of a home mold removal that you can implement.
Look for Moisture and Fix Its Source
Moisture starts the growth of molds. Whenever there is moist, mold infestation is always possible. Use it to detect where molds can be present. After you have determined the location of the infestation, look for its source or cause. It can be from a leak in the gutter, water pipes or containers or can be caused by the dampness in the indoor air. Check each possible source or cause and resolve them first before jumping on to the next step.
Dry Wet Mold Infested Items
If the item or the surface where molds had grown is wet, dry it first to have a better look at it. It will help you assess the extent of the damage. Further, this will help you decide whether you need professional help or you can do the mold cleaning by yourself or if there’s nothing left that you can do but look for or buy a replacement.
Clean the Molds
As soon as you know what to do, start the mold removal process. Gather everything that you need. Remember that to every mold case, additional steps might be needed or special tricks might make the cleaning more effective. Implement those added steps and tricks but always observe the standard procedure and be cautious in executing every one of them.
Maintain a Home Environment That Will Prevent Mold Growth
After the mold removal, make it a habit to practice steps that inhibit mold growth. Include in your cleaning routine procedures that can sure prevent the entry of molds in your home. Regulating indoor air humidity and keeping your home dry and properly ventilated are examples of those procedures.
Mold growth in houses is often a product of flood, leaks and other water-related incidents. They are deemed as threats to human health and even to the stability of the structure itself. To impose mold removal is the only way possible to save homes from mold risks and destruction.
As health threats, molds can cause a number of illnesses. Among those are allergies, asthma and other respiratory sickness. In extreme cases, they can even cause death. On the other hand, as a decomposer, molds can slowly eat your organic items away. With that said, it can consume a part or whole of your house as long as it of organic materials.
Only through mold removal can all the negative effects of molds be halted. However, how it is implemented is dependent on the extremity of its infestation. If the infestation is still mild, you can have the mold removal process done all by yourself. That may require just a little cleaning and use of mold removal products. In the case that the mold had really spread and had been causing quite a damage, then it is about time that a more serious job at hand is needed. With that, a contractor specializing into mold remediation is often hired.
Basically, the do-it-yourself mold removal process is more acquainted to household members. It is the one that is more often used in home cleaning, and here you can see how you can do it through this step by step process;
Protect Yourself
This first step refers to putting on protective gear before starting off the following steps. The gear may be consist of gloves, goggles, mask, respirator and coveralls. This will prevent you, as the user, from being exposed to spores and even chemicals that maybe embedded on your mold removal products while doing the work.
Prepare Mold-Infested Item or House
Before you can begin on the actual home mold removal, you must know beforehand the source of the mold growth. Leaks and malfunctioning drains can cause them so fixing and repairing may also mean cutting the sources that supports the mold growth. This and keeping the mold removal subject dry is part of the preparation stage. You can use fan, dehumidifiers or you can open doors and windows to keep the area you are working on properly ventilated.
Start the Actual Mold Removal Process
At this step, you may have to use your mold removal products or other greener alternatives to ensure a safe mold removal process. When using commercial mold removers, make sure to follow the instructions on how to use it. Be keen with every detail like the amount to be used. Also open your eyes to other items within the area for possible extended infestation.
Restrain the Re-Growth of Molds
After finishing the removal of molds, make sure that their growth have been fully restrained and that future mold growth will also be prevented. To do this, you have to keep the item or area dry always. As much as possible prevent indoor moisture and reduce indoor humidity.
Mold removal for not-so-extreme cases is enough to implement. With the above given steps, you can practice a safe mold removal that can have your home protected.
